Abrasive Coated Bonded Sanding Belt

Aluminium oxide Sanding Belt is the most common abrasive mineral and is widely used throughout the finishing industry. It is probably known as the least expensive abrasive and can be used on various applications, especially in the finer grit ranges

Zirconium is a very hard wearing abrasive for high stock removal applications. Ideal for grinding castings etc, it is used throughout various industries

Silicon Carbide abrasives can be used for a variety of different applications. Due to the sharp nature of the grain, this product is ideal where clogging or glazing of the belt can be an issue.

Ceramic abrasive is predominantly used in large stock removal application or where extended life is required. Due to the structure of the abrasive, the mineral continuously fractures thus providing the sharpest cut. Ideal for heavy grinding or deburring of castings.

Coat: Open or Closed

Grit Range: P24, P36, P40, P50, P60, P80, P120, P180

Backing: X & Y Weight Polyester,  J Weight Cotton in Finer Grits

Application: Cylindrical and Flat Grinding of Titanium, Stainless Steel, Nickel Alloys.

Additional Info: Available for both Dry & Wet Applications